plc automation

Hotline

6ES7350-1AH03-0AE0

description:SIMATIC S7-300, COUNTER MODULE FM 350-1 FOR S7-300, COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS ISOCHRON MODE, MEASUREMENT MODE INCL. CONFIG. PACKAGE ON CD...
BASIC INFO

6ES7350-1AH03-0AE0

6ES7350-1AH03-0AE0

SIMATIC S7-300, COUNTER MODULE FM 350-1 FOR S7-300, COUNTER FUNCTIONS UP TO 500 KHZ 1 CHANNEL FOR CONNECTION OF 5V AND 24V INCREMENTAL ENCODERS ISOCHRON MODE, MEASUREMENT MODE INCL. CONFIG. PACKAGE ON CD

 

Supply voltage
Auxiliary voltage 1L+, load voltage 2L+
● Rated value (DC) 24 V
● permissible range, lower limit (DC) 20.4 V; Dynamic 18.5 V
● permissible range, upper limit (DC) 28.8 V; dynamic 30.2 V
non-periodic skip
— Duration 500 ms
— Recovery time 50 s
— Value 35 V
Input current
from load voltage 1L+ (without load), max. 40 mA
from backplane bus 5 V DC, max. 160 mA
Encoder supply
5 V encoder supply
● 5 V Yes; 5.2 V +/-2%
● Output current, max. 300 mA
24 V encoder supply
● 24 V Yes; 1L+ (-3 V)
● Output current, max. 400 mA
Power loss
Power loss, typ. 4.5 W
Digital inputs
Number of digital inputs 3
Functions 1 for gate start, 1 for gate stop, 1 for setting the counter
Input voltage
● for signal "0" -28.8 ... +5V
● for signal "1" +11 to +28.8V
Input current
● for signal "1", typ. 9 mA
Digital outputs
Number of digital outputs 2
Short-circuit protection Yes; Clocked electronically
Limitation of inductive shutdown voltage to 2L+ (-39 V)
Output voltage
● for signal "0", max. 3 V
● for signal "1", min. 2L+ (-1,5 V)
Output current
● for signal "1" rated value 0.5 A
● for signal "1" permissible range for 0 to 60 °C, min. 5 mA
● for signal "1" permissible range for 0 to 60 °C, max. 0.6 A
Output delay with resistive load
● "0" to "1", max. 300 µs
Encoder
Connectable encoders
● Incremental encoder (symmetrical) Yes; With 2 pulse trains offset by 90°
● Incremental encoder (asymmetrical) Yes
● 24 V initiator Yes
● 24 V directional element Yes; 1 pulse train, 1 direction level
Counter
Number of counter inputs 1
Counting range, description 32 bit or ±31 bit
Minimum pulse width, adjustable Yes; 2.5 or 25 µs
Counter input 5 V
● Type RS 422
● Terminating resistor 220 Ω
● Differential input voltage 1,3 V
● Counting frequency, max. 500 kHz
Counter input 24 V
● Input voltage for signal "0" -28.8 ... +5V
● Input voltage for signal "1" +11 to +28.8V
● Input current for signal "1", typ. 9 mA
● Counting frequency, max. 200 kHz
● Minimum pulse width 2.5 µs
Potential separation
Potential separation digital inputs
● between the channels and backplane bus Yes; Optocoupler
Potential separation digital outputs
● between the channels and backplane bus Yes; Optocoupler
Potential separation counter
● between the channels and backplane bus Yes; Optocoupler
Isolation
Isolation tested with 500 V
Connection method
required front connector 1x 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 250 g
last modified: 08/29/2017
Pre:6ES7341-1BH02-0AE0 Next:6ES7350-2AH01-0AE0