plc automation

Hotline

Schneider LC1D32BD Contactor CONT. 15KW/400V LC1D32BD With G

description:TeSys D Contactors - LC1D32BDContactorsTeSys D contactor - 3P(3 NO) - AC-3 - ...
BASIC INFO
Schneider LC1D32BD Contactor CONT. 15KW/400V LC1D32BD With Good Price



TeSys D Contactors - LC1D32BD
Contactors
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A - 24 V DC coil
  • Product availability
Stock - Normally stocked in distribution facility

Schneider LC1D32BD Contactor CONT. 15KW/400V LC1D32BD With Good Price

Main
range TeSys  
product name TeSys D  
product or component type Contactor  
device short name LC1D  
contactor application Motor control
Resistive load
 
utilisation category AC-1
AC-3
AC-4
 
poles description 3P  
pole contact composition 3 NO  
System Voltage <= 300 V DC power circuit
<= 690 V AC 25...400 Hz power circuit
 
[Ie] rated operational current 32 A (<= 140 °F (60 °C)) at <= 440 V AC AC-3 power circuit
50 A (<= 140 °F (60 °C)) at <= 440 V AC AC-1 power circuit
 
motor power kW 15 kW at 380...400 V AC 50/60 Hz AC-3
7.5 kW at 220...230 V AC 50/60 Hz AC-3
18.5 kW at 500 V AC 50/60 Hz AC-3
18.5 kW at 660...690 V AC 50/60 Hz AC-3
15 kW at 415...440 V AC 50/60 Hz AC-3
7.5 kW at 400 V AC 50/60 Hz AC-4
 
motor power hp 2 hp at 115 V AC 50/60 Hz 1 phase motors
5 hp at 230/240 V AC 50/60 Hz 1 phase motors
7.5 hp at 200/208 V AC 50/60 Hz 3 phases motors
10 hp at 230/240 V AC 50/60 Hz 3 phases motors
20 hp at 460/480 V AC 50/60 Hz 3 phases motors
30 hp at 575/600 V AC 50/60 Hz 3 phases motors
 
control circuit type DC standard  
[Uc] control circuit voltage 24 V DC  
auxiliary contact composition 1 NO + 1 NC  
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947  
overvoltage category III  
[Ith] conventional free air thermal current 50 A at <= 140 °F (60 °C) power circuit
10 A at <= 140 °F (60 °C) signalling circuit
 
Irms rated making capacity 550 A at 440 V power circuit conforming to IEC 60947
140 A AC signalling circuit conforming to IEC 60947-5-1
250 A DC signalling circuit conforming to IEC 60947-5-1
 
rated breaking capacity 550 A at 440 V power circuit conforming to IEC 60947  
[Icw] rated short-time withstand current 138 A <= 104 °F (40 °C) 1 min power circuit
260 A <= 104 °F (40 °C) 10 s power circuit
430 A <= 104 °F (40 °C) 1 s power circuit
60 A <= 104 °F (40 °C) 10 min power circuit
100 A 1 s signalling circuit
120 A 500 ms signalling circuit
140 A 100 ms signalling circuit
 
associated fuse rating 63 A gG at <= 690 V coordination type 1 power circuit
63 A gG at <= 690 V coordination type 2 power circuit
10 A gG signalling circuit conforming to IEC 60947-5-1
 
average impedance 2 mOhm at 50 Hz - Ith 50 A power circuit  
[Ui] rated insulation voltage 600 V power circuit certifications CSA
600 V power circuit certifications UL
690 V power circuit conforming to IEC 60947-4-1
690 V signalling circuit conforming to IEC 60947-1
600 V signalling circuit certifications CSA
600 V signalling circuit certifications UL
 
electrical durability 1.65 Mcycles 32 A AC-3 at Ue <= 440 V
1.4 Mcycles 50 A AC-1 at Ue <= 440 V
 
power dissipation per pole 2 W AC-3
5 W AC-1
 
protective cover With  
mounting support Plate
Rail
 
standards CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
 
product certifications BV
CCC
CSA
DNV
GL
GOST
LROS (Lloyds register of shipping)
RINA
UL
 
connections - terminals Control circuit: screw clamp terminals 2 cable(s) 0...0 in² (1...2.5 mm²) - cable stiffness: flexible - with cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.02 in² (1.5...10 mm²) - cable stiffness: solid - without cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible - without cable end
Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible - without cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: flexible - with cable end
Control circuit: screw clamp terminals 1 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: solid - without cable end
Control circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1...4 mm²) - cable stiffness: solid - without cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.02 in² (2.5...10 mm²) - cable stiffness: flexible - without cable end
Power circuit: screw clamp terminals 2 cable(s) 0...0.02 in² (2.5...10 mm²) - cable stiffness: flexible - without cable end
Power circuit: screw clamp terminals 1 cable(s) 0...0.02 in² (1...10 mm²) - cable stiffness: flexible - with cable end
Power circuit: screw clamp terminals 2 cable(s) 0...0.01 in² (1.5...6 mm²) - cable stiffness: flexible - with cable end
Power circuit: screw clamp terminals 2 cable(s) 0...0.02 in² (2.5...10 mm²) - cable stiffness: solid - without cable end
 
tightening torque Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 15.04 lbf.in (1.7 N.m) - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 22.12 lbf.in (2.5 N.m) - on screw clamp terminals - with screwdriver flat Ø 6 mm
Power circuit: 22.12 lbf.in (2.5 N.m) - on screw clamp terminals - with screwdriver Philips No 2
 
operating time 53.55...72.45 ms closing
16...24 ms opening
 
safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
 
mechanical durability 30 Mcycles  
operating rate 3600 cyc/h at <= 140 °F (60 °C)  
 
Complementary
coil technology Built-in bidirectional peak limiting diode suppressor  
control circuit voltage limits 0.1...0.25 Uc drop-out at 140 °F (60 °C), DC
0.7...1.25 Uc operational at 140 °F (60 °C), DC
 
time constant 28 ms  
inrush power in W 5.4 W at 68 °F (20 °C)  
hold-in power consumption in W 5.4 W at 68 °F (20 °C)  
auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
Type mirror contact (1 NC) conforming to IEC 60947-4-1
 
signalling circuit frequency 25...400 Hz  
minimum switching current 5 mA signalling circuit  
minimum switching voltage 17 V signalling circuit  
non-overlap time 1.5 ms on energisation between NC and NO contact
1.5 ms on de-energisation between NC and NO contact
 
insulation resistance > 10 MOhm signalling circuit  

Schneider LC1D32BD Contactor CONT. 15KW/400V LC1D32BD With Good Price
 
Environment
IP degree of protection IP20 front face conforming to IEC 60529  
protective treatment TH conforming to IEC 60068-2-30  
pollution degree 3  
ambient air temperature for operation 23...140 °F (-5...60 °C)  
ambient air temperature for storage -76...176 °F (-60...80 °C)  
permissible ambient air temperature around the device -40...158 °F (-40...70 °C) at Uc  
operating altitude 9842.52 ft (3000 m) without derating in temperature  
fire resistance 1562 °F (850 °C) conforming to IEC 60695-2-1  
flame retardance V1 conforming to UL 94  
mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz
Vibrations contactor closed 4 Gn, 5...300 Hz
Shocks contactor closed 15 Gn for 11 ms
Shocks contactor open 8 Gn for 11 ms
 
height 3.35 in (85 mm)  
width 1.77 in (45 mm)  
depth 3.98 in (101 mm)  
product weight 1.18 lb(US) (0.535 kg)  
 
Ordering and shipping details
Category 22345 - CTR,D-LINE,OPEN,NONREV-NEW  
Discount Schedule I12  
GTIN 00785901207313  
Nbr. of units in pkg. 1  
Package weight(Lbs) 1.29  
Returnability Y  
Country of origin ID  
 
Offer Sustainability
Sustainable offer status Green Premium product  
RoHS (date code: YYWW) Schneider Electric declaration of conformity  
REACh Reference not containing SVHC above the threshold  
Product environmental profile Available  
Product end of life instructions Available  
California proposition 65 WARNING: This product can expose you to chemicals including:  
- - - - - - - Substance 1 Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer.  
- - - - - - - More information For more information go to www.p65warnings.ca.gov  
 
Contractual warranty
Warranty period 12 months

Schneider LC1D32BD Contactor CONT. 15KW/400V LC1D32BD With Good Price

4. Quality assurance:
 
100% original product, 100% quality assurance. 
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex and EMS, the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
 

5.Contact details:

HONGKONG XIEYUAN TECH CO., LIMITED

Email/Skype:sales5@hkxytech.com/amy@whxyauto.com

Whatsapp/Mobile::+8613135657923
 
Web:www.hkxytech.com/www.plcs-automation.com
 
We mainly supply YOKOGAWA, SIEMENS, EMERSON, ABB, HONEYWELL, Allen Bradley,ENDRESS+ HAUSER, PEPPERL+FUCHS, FESTO, PARKER, FLUKE, WEIDMULLER, MTL, SMC,Schneider, Hirschmann,  ADVANTECH,MOXA, US Sensor, Mean Well, Murphy, YTC. Fisher, Auma, Rittal brands products. 
 
Any brand products inquiry, feel free to contact me.
 


Pre:SCHNEIDER LC1D25BD Contacor CONT. 11KW/400V LC1D25BD With Go Next:Schneider SQUARE D 9007CR61B2 Nema Limit Switches SQUARE-D 9